E3.series 2015 version 16.01 Update | 141.0 mb
Zuken, a global provider of leading-edge software and consulting services for electrical and electronic design and manufacturing, has released an update (Build 16.01) for Zuken E3.Series 2015, is a scalable, easy-to-learn system for the design of wiring and control systems, hydraulics and pneumatics.
The out-of-the-box solution includes schematic (for circuit and fluid diagrams), cable (for advanced electrical and fluid design), panel (for cabinet and panel layout), and formboard (for 1:1 wiring harness manufacturing drawings). Integrated with MCAD, E3.series is a complete design engineering solution from concept through physical realization and manufacturing output.
Designer-08101 COM methods 'pin.SetColourByDescription' and 'pin.SetCrossSectionByDescription' always return 0
Designer-09383 Autosave is not started after expiration of time, but only after interactive activity (save project automatically)
Designer-10582 When sheet format MAXBORD not sufficient for component modification in DBE, error message 'E - An unspecified error occurred. Command aborted' appears and internal subsequent errors occur
Designer-13583 When models are automatically plugged over assemblies they can lie on top of each other
Designer-17422 Command is aborted, when selecting the 'Zoom in' and 'Zoom out' command
Designer-17953 When renaming wires within a wire group, these new names are not updated after 'Update in Project' => now depending on setting by order of wires in group
Designer-18064 Possible to enter invalid boolean expressions in the 'Device Properties -> Assign variants/options' dialog
Designer-20666 Invisible texts are not considered by 'Select all (Ctrl+A)' when editing symbol in DBE
Designer-20936 Docking window size changes although saved in workspace when reopening E3
Designer-21186 Not all connections displayed in Connection Table when partly wires are placed
Designer-21585 COM method 'job.SaveAs' opens query dialog if EarlyBinding is used
Designer-24655 The confirmation of symbol properties at symbol editing within the database editor moves the symbol origin when it's located outside the space requirement and when the setting 'Edit space
Designer-24948 When importing a sub-circuit devices are not connected correctly when not all parts of the device designation are considered for checking the uniqueness
Designer-25317 Text types of connection targets (#1002, #1085 and #1086) not filled with views
Designer-25527 When a component with unassigned model pins is placed on a sheet which owns another schematic type than all symbols of the component, the following error message appears 'E - Error in Function rotscal_symbol(), ret = 7'
Designer-26199 When importing a sub-circuit with cross reference symbols, the conductor is not connected to the imported target connection
Designer-26275 When importing sub-ciruits wires are partially not routed over reference symbols
Designer-26309 Exported CGM files are larger in scaling than the source files Designer-26396 DGN import not working No RXObject to handle this type (OdDgTextNode2d) yet!
Designer-26414 Incomplete DXF import when 'Viewport' objects are present
Designer-26568 Ballooning of texts gets lost after PDF export when the text color is white and the text is located on white background
Designer-26731 Panel-Autoconnect generates more wires within the maximum wire count than allowed
Designer-26752 No routing of connections in Panel when symbols of different options are overlapping
Designer-26755 No function of automatic mating connector generation on bus pins when the number of mating connector pins is less than the number of device pins
Designer-26771 No display of context menus after clicking the 'right tab' within the dialog 'Input Coordinates'
Designer-26794 Undo doesn't reverse changed origin coordinate on model
Designer-26803 Missing checks whether the same jumper is defined at pin to be connected or not. Thus, components are bridged which are not supposed to
Designer-26806 Device properties are available in database editor but greyed out by default
Designer-26816 Pins on break of connection line are not checked
Designer-26829 No output of internal connections with conductors in complete connector view within the nets/net segments
Designer-26833 Missing COM call SetPhysicalmaximumConnections in pin Interface
Designer-26834 Wrong output of objecttype in the ExportForeign database
Designer-26838 eCheck: More than one actuator-function unit within a symbol leads to infinite loop
Designer-26848 When a cable is duplicated due to Inline function, the setting 'Placement - Import - Device - Generate Item Designation' is not evaluated
Designer-26867 Display order in DBE is not saved
Designer-26915 When a symbol is moved in MU, all sheets where the wire is displayed must be checked out and the command must be executed again
Designer-26950 Change of assignment or location of block leads to following warning message at mating connector 'W - Mating connector of [xxx] cannot be renamed because a device with this name already exists'
Designer-26953 E3 blocks after inserting a wire (performance) 'Settings - Connection - Conductors/Wires: Show information for options combinations' is active
Designer-26958 After symbol change (characteristic) or update all information of the connector pin terminal is overwritten by the model data due to the setting 'Use cross-section of connector pin terminal instead of model pin'
Designer-26966 Trigger "AfterWireDisconnected" is not executed when 'unconnect conductor' has been forced by component change
Designer-26967 The symbolism for the setting 'Mark connect nodes defined as not connected (**NC**)' is not hidden although an option has been deactivated
Designer-26969 When copying and afterwards inserting a rotated model the following error message appears 'E - Fehler in Funktion dfi_position\dfi_position_generate(), ret = 2'
Designer-26976 The function "Update group in project" generates wrong connections of signal cross-references
Designer-27002 No possibility to place a component which has the symbol type 'attribute text template' on a sheet with 'default number of view'
Designer-27005 Crash of E3 during scaling of a graphic which is part of grouped objects
Designer-27028 Initial placement of two symbols from device 3RH11401HB40 causes warning W - One or more texts of type 'Reference to pin number' on CIM07-50-87 are not linked to a device pin.
Designer-27059 COM: Function "Device.SetPanelLocation" with pivot=1 is placing at wrong position
Designer-27061 When moving options in variant tree which are not unique anymore within the project consistency errors occur because the assigned boolean operators have not been adapted to the new unique variant naming
Designer-27070 Attribute text template doesn't display attributes from a cable, if the cable is within an assembly
Designer-27087 Inconvenient handling at selection/filtering of texts with F3 from language database
Designer-27097 Input of signal equivalence within the pin assignment of DBE leads to crash of E3 when Japanese language is set
Designer-27113 Unnecessary error message when opening a project which has sorted the model tree by component name and which contains variants/options
Designer-27123 Invalid characters can be imported to project as option-/variant names
Designer-27124 Error at exchange of valid connector pin terminal in 'Component properties - pins', when an alternative call up name is set for the database structure and no value is available in the alternative call up name
Designer-27197 The backwards renaming similar to Excel returns unnecessary leading zeros
Designer-27202 Error message "E - Error in function test_visibility(), ret = 1" may appear within the model properties
Designer-27208 With defined classification and classification levels within the database tree structure, new cable creation leads to attribute doubling when using a template which already contains the attributes
Designer-27213 The building phase of the context menu takes very long when connections with many cables are existing
Designer-27225 PDF export leads to following error message 'Value for option 'bottom' is too small (minimum 0)'
Designer-27276 DXF/DWG export generates wrong position at text ballooning
Zuken is a global provider of leading-edge software and consulting services for electrical and electronic design and manufacturing. Founded in 1976, Zuken has the longest track record of technological innovation and financial stability in the electronic design automation (EDA) software industry. The company's extensive experience, technological expertise and agility, combine to create world-class software solutions. Zuken's transparent working practices and integrity in all aspects of business produce long-lasting and successful customer partnerships that make Zuken a reliable long-term business partner.
Zuken is focused on being a long-term innovation and growth partner. The security of choosing Zuken is further reinforced by the company's people-the foundation of Zuken's success. Coming from a wide range of industry sectors, specializing in many different disciplines and advanced technologies, Zuken's people relate to and understand each company's unique requirements.
Name: Zuken E3.Series
Version: 2015 version 16.01
OS: Windows 7even / 8
System Requirements: Zuken E3.Series 2015
Size: 141.0 mb